Encrypted flash/USB drive usage

To access data on the flash drive, you must first unlock it before connecting it to your computer. This is done by:

1. Press the “green unlock” button (the red light will glow solid.) You have 10 seconds to enter the code)
2. Enter the code which is: 25082508
3. Press the “green unlock” button (if successful, the green light will rapidly blink four times, then will slow to one blink once a second until plugged into a computer at which time it will glow solid green)
4. You have 30 seconds to plug it into to your computer when the light is blinking green. If you don’t plug it in within that time, the red light will light and you will have to start over at step 1)